LV Power Cable
LV (Low Voltage) Power Cables are designed for the safe and efficient transmission of electrical power at voltages up to 1.1 kV. Widely used in residential, commercial, and industrial installations, these cables ensure reliable power distribution with excellent electrical and mechanical performance. Manufactured using high-quality copper or aluminium conductors with robust XLPE insulation and PVC sheathing, LV power cables are built to meet national and international safety standards.
Applications
- Residential and commercial building wiring
- Industrial power distribution systems
- Control panels and switchgear connections
- Underground and cable tray wire distribution
- Power supply for lighting, motors, and machinery
Technical Specifications
Features:
- Suitable for voltages up to 1.1 kV
- High-quality copper or aluminium conductors for efficient conductivity
- Strong PVC or XLPE insulation for electrical and thermal protection
- Excellent mechanical strength and flexibility
- Resistant to heat, moisture, abrasion, and chemicals
- Long service life with low maintenance requirements
| SN | Property | Requirement |
|---|---|---|
| i) | Tensile strength | 12.5 N/mm², Min |
| ii) | Elongation at break | 200 percent, Min |
| iii) | Ageing in air oven | |
| a) Treatment : Temperature | 135 ± 3°C | |
| Duration | 7 days | |
| b) Tensile strength variation | ± 25 percent, Max | |
| c) Elongation variation | ± 25 percent, Max | |
| iv) | Hot set | |
| a) Treatment : Temperature | 200 ± 3°C | |
| Time under load | 15 minutes | |
| Mechanical stress | 20 N/cm² | |
| b) Elongation under load | 175 percent, Max | |
| c) Permanent elongation (set) after cooling | 15 percent, Max | |
| v) | Shrinkage | |
| a) Treatment : Temperature | 130 ± 3°C | |
| Duration | 1 hour | |
| b) Shrinkage | 4 percent, Max | |
| vi) | Water absorption (gravimetric) | |
| a) Treatment : Temperature | 85 ± 2°C | |
| Duration | 14 days | |
| b) Water absorbed | 1 mg/cm², Max | |
| vii) | Volume resistivity: | |
| a) at 27°C | 1 x 10¹⁴ ohm-cm, Min | |
| b) at 90°C | 1 x 10¹³ ohm-cm, Min | |