Rathi Fire X Zero Halogen Cable
Rathi Fire X Zero Halogen Cable
Fire Safety Without Compromise. Protection for People and the Environment.
In electrical fires, one of the greatest dangers is not just the flame – it is the toxic and corrosive halogen gases released from conventional cable insulation. These gases can severely affect breathing, reduce visibility, and damage critical equipment, often causing greater harm than the fire itself.
Rathi Fire X Zero Halogen Cables are engineered to eliminate this risk. Manufactured using advanced halogen-free insulation compounds, these cables provide enhanced fire safety while supporting environmentally responsible construction.

Applications
Rathi Fire X Zero Halogen Cables are ideally suited for use in sensitive and high-occupancy environments, including public buildings, institutions, industrial facilities, and other locations where strict cable safety standards are essential.
Beyond being halogen-free, these cables are engineered with flame-retardant and self-extinguishing properties, helping to prevent the spread of fire. By combining low toxicity, fire safety, and reliable performance, Rathi Fire X Zero Halogen Cables provide an optimal solution for installations where maximum safety and environmental responsibility are critical priorities.
Technical Specifications
Voltage Grade: 1100V
Standard Colours: Red, Green, Yellow, Blue, Black
Insulation Compound: ZHFR Compound
Test Passed: 20+
Certification: NS 344: 2074, ISO, Fire Insurance Approved
Cable Type: PVC Insulated Cable
Features:
- Zero Halogen Insulation – No release of toxic or corrosive halogen gases during fire.
- Fire Resistant Construction – Helps limit flame propagation and enhances overall safety.
- Low Smoke Emission – Improves visibility and evacuation conditions in emergencies.
- High-Quality Conductors – Ensures efficient power transmission and stable performance.
- Durable and Long-Lasting – Resistant to heat, aging, and mechanical stress.
| SN | Test | Unit | Test Method | Type of Insulation - Zero Halogen Compound |
|---|---|---|---|---|
| (1) | (2) | (3) | (4) | (5) |
| 1 | General | |||
| 2 | Insulation resistance constant at rated temp. | MΩ.km | IS 10810-Part 43 | Min. 0.037 |
| Temperature | °C | 70 ± 2 | ||
| Test duration | Hr. | 1 | ||
| 3 | Properties before ageing | |||
| 3.1 | Values to be obtained for the tensile strength: - Min. | N/mm² | IS 10810-Part 7 | 7.5 |
| Values to be obtained for the elongation at break: - Min. | Percent | 150 | ||
| 3.2 | Properties after ageing in air oven | IS 10810- Part 11 | ||
| Ageing conditions: - temperature | °C | 80 ± 2 | ||
| - duration of treatment | h | 168 | ||
| Value to be obtained for the tensile strength: - Min. | N/mm² | — | ||
| - variation, Max. | Percent | ± 20 | ||
| Values to be obtained for the elongation at break: - Min. | N/mm² Percent | — | ||
| - variation, Max. | ± 20 | |||
| 4 | Hot Deformation Test | |||
| Temperature | °C | IS 10810-Part 15 | 80 ± 2 | |
| Period of test | Hr. | 4 | ||
| Result | Percent | Max. 50 | ||
| 5 | Hot set test | IS 10810-30 | ||
| Temperature | °C | — | ||
| Period under load | Min | — | ||
| Mechanical stress | N/cm² | — | ||
| Elongation under load, Max. | Percent | — | ||
| Permanent Elongation, Max. | Percent | — | ||
| 6 | Cold Bend Test | IS 10810-Part 20 | ||
| Temperature | °C | -15 ± 2 | ||
| Period of test | h | 3 | ||
| Result | No Cracks | |||
| 7 | Cold Impact test | IS 10810-Part 21 | ||
| Temperature | °C | -15 ± 2 | ||
| Period of test | h | 3 | ||
| Result | No Cracks | |||
| S.N | Test | Test Method | Typical Value |
|---|---|---|---|
| 1 | Oxygen Index Test | IS 10810, Part 58 | Should be greater than 31%. |
| 2 | Temperature Index Test | IS 10810, Part 64 | 250 degree Celcius |
| 3 | Halogen Gas Acid Evaluation Test | IS 10810, Part 59 | Nill |
| 4 | Smoke Density Test | IS 10810, Part 63 | 70% |
| Notes : These above details are for information purpose only. | |||